The SmallRig Super Clamp is a compact way to attach a camera or compatible accessory to a bar, shelf, or other surface that fits its jaws.
This SmallRig Super Clamp review looks at its adjustable opening, threaded attachment points, and the practical limits to check before mounting gear.
SmallRig Super Clamp Review Summary
The quick verdict

2,000+ ratings
Read Amazon ReviewsSmallRig Super Clamp
A compact clamp for camera creators who need to attach lightweight accessories to compatible bars, shelves, or other surfaces.
- Adjustable jaw opens from a minimum of 15 mm to about 40 mm.
- Includes 1/4-inch and 3/8-inch threaded holes for compatible accessories.
- Made from aluminum alloy and stainless steel.
- Rubber pads at the clamp contact points are designed to help limit slipping and scratching.
Pros
- Two thread sizes provide useful flexibility for attaching compatible camera accessories.
- The adjustable jaw can fit a variety of surfaces within its stated 15–40 mm range.
Consider before buying
- The jaw range rules out surfaces thinner than 15 mm or thicker than about 40 mm.
- The 3.3-pound maximum recommendation limits its role in heavier camera setups.
Read the full review summary
This clamp combines an adjustable jaw with 1/4-inch and 3/8-inch threaded holes, giving you options for attaching compatible camera accessories.
Its aluminum-alloy and stainless-steel construction and padded contact points suit a small mounting accessory intended for flexible rig setups.
It is best for buyers who already know the surface thickness and accessory connection they need.
The jaw is designed for surfaces from 15 mm to about 40 mm thick, and the listed maximum weight recommendation is 3.3 pounds.
Treat that capacity as a limit to respect, especially when the setup may move or be bumped.
The buying factors
SmallRig Super Clamp Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Mounting flexibility
The clamp can attach to a range of surfaces, while its 1/4-inch and 3/8-inch threaded holes support compatible accessories.
Jaw range
The 15–40 mm opening covers a useful range of bars and edges, but excludes thinner or thicker mounting points.
Accessory compatibility
Two thread sizes broaden the accessory options, though buyers should match the thread and attachment method of each component.
Build materials
Aluminum alloy and stainless steel provide a substantial metal construction for a compact clamp.
Surface protection
Rubber pads are intended to reduce slipping and scratching where the clamp contacts the mounting surface.
Load suitability
The listed maximum recommendation is 3.3 pounds, making it more appropriate for modest camera setups than heavy rigs.
Key Features and Specifications of SmallRig Super Clamp
- Adjustable jaw opens from a minimum of 15 mm to about 40 mm.
- Includes 1/4-inch and 3/8-inch threaded holes for compatible accessories.
- Made from aluminum alloy and stainless steel.
- Rubber pads at the clamp contact points are designed to help limit slipping and scratching.
- Intended for mounting on suitable surfaces such as bars, shelves, hooks, or plate glass.
- Listed maximum weight recommendation is 3.3 pounds.
- The package includes one super clamp.
Pros and Cons of SmallRig Super Clamp
Pros
- Two thread sizes provide useful flexibility for attaching compatible camera accessories.
- The adjustable jaw can fit a variety of surfaces within its stated 15–40 mm range.
- Metal construction and rubber contact pads suit a reusable mounting accessory.
- Compact design can add a mounting point without requiring a large support structure.
Consider before buying
- The jaw range rules out surfaces thinner than 15 mm or thicker than about 40 mm.
- The 3.3-pound maximum recommendation limits its role in heavier camera setups.
- It is a clamp rather than a complete articulated mounting kit, so buyers may need a separately compatible arm or head to position some accessories.
Who Should Buy SmallRig Super Clamp?
Good fit
Consider the SmallRig Super Clamp if you need a small, adaptable anchor point for a camera or accessory and your mounting surface falls within the jaw range.
Its two threaded sizes can make it easier to connect compatible components already in a camera kit.
Before choosing it, measure the surface at the exact clamping point and check both the accessory thread and the total supported load.
For a rig near the stated limit, account for the full mounted setup rather than the camera alone.
Who should skip it
Skip this clamp if your support surface is outside the 15–40 mm jaw range or your equipment exceeds the listed 3.3-pound maximum recommendation.
If you need an adjustable arm included, confirm that the package contents meet that need before buying.
How the SmallRig Super Clamp Fits a Camera Rig
Check the clamping surface first
The jaw range is the most important fit check: the clamp is specified for surfaces at least 15 mm and no more than about 40 mm thick.
Measure the section where the clamp will sit, since a rail or shelf may vary in thickness along its length.
Match threads to the accessory
The 1/4-inch and 3/8-inch threaded holes offer two attachment points for compatible accessories. Confirm the thread size and orientation of the part you plan to attach; the clamp’s versatility depends on those components fitting together.
Keep the load within its intended range
A maximum weight recommendation of 3.3 pounds is a useful boundary for planning a setup, not a reason to assume every mounting position behaves the same way.
Include the camera and attached accessories when estimating total load, and consider whether movement or leverage could affect the arrangement.
Consider contact with the surface
Rubber pads are designed to help protect the clamped surface and resist slipping.
For a delicate finish or an unusual shape, check that the pads sit evenly and that the clamp can close without rocking or concentrating pressure at one edge.
Alternatives to SmallRig Super Clamp
Camera Mounts & Clamps alternative

8,000+ ratings
Read Amazon ReviewsSmallRig Double Ball Head Super Clamp Mount
Choose this option if you want an integrated ball-head adjustment and action-camera adapter. The reviewed clamp is a simpler fit when you mainly need the clamp and its two threaded holes.
- This mount combines a clamp with a double ball head and a 1/4-inch screw, and includes an action-camera mount adapter.
- Its listed weight capacity is up to 1.5 kg.
- The SmallRig Super Clamp provides a clamp with 1/4-inch and 3/8-inch threaded holes, but no articulated arm is included.
Camera Mounts & Clamps alternative

3,000+ ratings
Read Amazon ReviewsSmallRig 9.8-Inch Magic Arm Clamp Kit
Choose the kit if you need an included arm for positioning an accessory and want the wider stated jaw opening.
The reviewed clamp is a more direct choice if its 15–40 mm range fits and you already have the attachment hardware you need.
- This kit includes a clamp with 1/4-inch and 3/8-inch threads plus a 9.8-inch articulating arm with 1/4-inch screws at both ends.
- Its clamp opens from 15 mm to 54 mm.
- The SmallRig Super Clamp has a jaw range of 15–40 mm and is supplied as a single clamp.
Is SmallRig Super Clamp Worth It?
The SmallRig Super Clamp is worth considering when you need a compact, metal clamp with two common accessory thread sizes and a mounting surface that fits its 15–40 mm jaw range.
Its padded contact points add a practical touch for securing it to compatible surfaces.
Buy it for a modest camera accessory setup that stays within the 3.3-pound maximum recommendation, after checking the surface, thread fit, and total load.
Look elsewhere if you need an articulated arm included or a clamp for surfaces outside its specified range.
Your review at a glance

2,000+ ratings
Read Amazon ReviewsSmallRig Super Clamp
A compact clamp for camera creators who need to attach lightweight accessories to compatible bars, shelves, or other surfaces.
- Adjustable jaw opens from a minimum of 15 mm to about 40 mm.
- Includes 1/4-inch and 3/8-inch threaded holes for compatible accessories.
- Made from aluminum alloy and stainless steel.
- Rubber pads at the clamp contact points are designed to help limit slipping and scratching.